Oce VarioStream 7000 SINGLE - Emptying Condensation Water When Using the High Temperature Kit (Optional)

5.11 Emptying condensation water when using the High Temperature Kit (optional)
172 A29246-X20-X-4-7680 / fa510.fm
5.11 Emptying condensation water when using the High Temperature
Kit (optional)
The condensation water that accumulates when using the High Temperature Kit must be
collected in a suitable container.
Proceed as follows:
1. Open the slide-in unit with the condensation water container.
2. Remove the condensation water container and empty it.
3. Place the empty container into the slide-in unit.
4. Close the slide-in unit with the condensation water container.