2.7 Safety regulations and standards
A29246-X20-X-4-7680 / all203.fm 37
• Points to observe when disposing of a photoconductor drum:
– Before touching the drum, always put on the gloves provided with the drum.
– Should the photosensitive coating on the drum flake off, carefully collect the flakes or
fragments of coating.
– Store the photoconductor drum and any flakes of coating in the original drum packag-
ing.
– The drums and coating are hazardous waste and require special disposal. Keep the
original carton with the photoconductor drum and flakes of coating for collection by ser-
vice or the contracted shipping company. Keep the carton out of the reach of children.
– Wash your hands afterwards
2.7 Safety regulations and standards
The printing system complies with the relevant safety requirements for information technol-
ogy equipment. It meets the following national and international product standards and reg-
ulations:
• VDE 0805/11.93 / VDE GS mark
• TRGS 402/ TRGS 100
• IEC 60950
• EN 60950
• UL 60950
• CSA Standard C22.2 No. 60950
• EN 55022 / class A (Europe)
• EN 55024
• FCC Part 15 Subpart B Class A (USA)
• C108.8 M1983 Class A (Canada)
Further information:
2.7.1 CE Mark >>> page 38
2.7.2 Accident prevention regulations for the replacement cart for developer stations (opti-
onal) >>> page 38
To Next Page
Loading...
