8.2.2 Continuing printing after errors have been corrected
A29246-X20-X-4-7680 / fa801.fm 341
8.2.2 Continuing printing after errors have been corrected
Print stop without loss of information
The printing system remains at the start of a page.
Print stop with loss of information
If a cover is opened during printing, or if an error that can damage the printing system
occurs during printing, the printing system stops with loss of information.
Proceed as follows:
1. Eliminate the reason why printing stopped as indicated by the information in the error
message.
2. Click on the following button:
Printing operation is restarted smoothly and without any impairment of the print and
fusing quality.
Proceed as follows:
1. Eliminate the reason why printing stopped as indicated by the information in the error
message.
2. Click on the following button:
The print image on the damaged print pages is fused to ensure that the tension roller
and post-processing are not soiled.
1 of 2
To Next Page
Loading...
