5.8 Working with setups
A29246-X20-X-4-7680 / fa508.fm 133
5.8 Working with setups
You can collect and save specific settings for frequently recurring print jobs in Setups.
By loading a setup of this type you can then set up the printing system for a print job with
the corresponding parameters. Then all the required paper adjustments for inserting the
paper are performed automatically.
Further information:
5.8.1 Creating a new setup or changing a setup >>> page 134
5.8.2 Importing a setup >>> page 136
5.8.3 Exporting a setup >>> page 137
Note
When working with setups, the printing system must be in the "Stop" status.
Detailed information on the <Setup> and <Setup channel A / B / C> menus and the
respective operating elements is also available directly in the operator panel via the
context-sensitive Direct Help.
The context-sensitive Direct Help can be called up by selecting the relevant menu or
operating element and then pressing the F1 key.
To Next Page
Loading...
