Cleaning materials and equipment
A29246-X20-X-4-7680 / faA01.fm 365
• Coverage is 16% of the maximum printable characters at 1/10" column spacing and 1/6" line spacing
• Different operating conditions can lead to shorter life cycles, i.e. higher usage (roughly 20 - 30%).
• Toner and developer storage: Always store in a cool (< 35
o
C), dry and well ventilated room. Never
expose toner to direct heat (sunlight, heaters, etc.)
Cleaning materials and equipment
Caution
Please observe the following safety directives:
• Please follow the manufacturer's safety instructions.
• Do not use chemical solvents or other aggressive cleaning materials.
• Always use an industrial vacuum cleaner with a grounded suction tube, rubber
nozzle and filter set for fine dust. For vacuuming large quantities of toner spill (e. g.
full bottle), the industrial vacuum cleaner must be explosion-proof.
Cleaning materials/
equipment
Purpose Remarks
Methylated spirits
(denatured ethyl alcohol)
To remove traces of
adhesive
Caution
Flammable!
Observe the manufacturer’s safety
directives on the container.
Standard store-bought quality
Cleaning materials
6-1508/W1/H
Cleaning toner residue
from soft fuser rollers
Caution
Flammable!
Observe the manufacturer’s safety
directives on the container.
From manufacturer only:
TGW Technische Gummi Walzen GmbH
Am Elzdamm 38
D-79312 Emmendingen
Glass cleaning agent Cleaning the vision
panels
Standard store-bought quality
Household detergent Cleaning varnished
surfaces
Standard store-bought quality
Paper tissues To clean areas soiled
with toner, developer and
dust
Standard store-bought quality (e.g.
KLEENEX)
1 of 2
To Next Page
Loading...
