Oce VarioStream 7000 SINGLE - Replacing the Waste Toner Bottle

7.2.3 Replacing the waste toner bottle
A29246-X20-X-4-7680 / fa701.fm 233
7.2.3 Replacing the waste toner bottle
Strictly observe the following safety directives when replacing the waste toner bottle:
The printing system detects when the waste toner bottle is full automatically and displays a
warning on the operator panel in good time. The following procedure is for replacing the
waste toner bottle:
- Removing the waste toner bottle >>> page 233
- Installing the waste toner bottle >>> page 236
Removing the waste toner bottle
Caution
• Do not allow toner to get into eyes. In the event of contact with eyes, rinse eyes out
with plenty of water and seek medical help.
• Avoid contact with skin; wear gloves. In the event of contact with the skin, wash toner
off with plenty of water.
• Do not inhale toner. Avoid accumulation of dust. If, after inhaling toner, you
experience symptoms such as nausea, headaches or dizziness, immediately go out
into the fresh air.
• Do not spill toner. You can slip on spilled toner.
Clean up toner spill immediately.
• Keep waste toner bottle out of the reach of children and store it away from containers
used for food and drink.
• Always use an industrial vacuum cleaner with a grounded suction tube, rubber
nozzle and filter set for fine dust. For larger quantities of toner spill (e. g. full bottle),
the industrial vacuum cleaner must be explosion-proof.
Important
Keep used toner ready for collection by service or the contracted shipping company .
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger quantities of toner spill (e. g. full bottle), the
industrial vacuum cleaner must be explosion-proof.