7.2.2 Filling the toner box
232 A29246-X20-X-4-7680 / fa701.fm
7.2.2 Filling the toner box
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
2. On the operator panel select:
• Menu <Replace consumables> <Fill toner box>
3. Click the following button to start filling the toner box:
The toner is fed into the toner box.
Information on the icons displayed on the operator panel under "Worksteps":
see section Icons, page 93
4. Click the following button on the operator panel to complete the filling of the toner
box:
All printing system assemblies are checked (duration approx. 2-3 minutes) before the
printing system is switched to the "Ready" status.
In both cases, the filling of the toner box is documented in the <Consumables
history> menu.
To Next Page
Loading...
