6.7 Cleaning the developer station
A29246-X20-X-4-7680 / fa603.fm 203
6.7 Cleaning the developer station
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
2. Open the right door at the front of the printing system.
3. Pull the lever forwards to open the
door in front of the photoconductor
door.
4. Push the locking lever to the right. Pull
the door by the lever and open it to the
stop point.
5. Open the center and left door at the back of the printing system.
1 of 4
To Next Page
Loading...
