5.12 Powering off the printing system
A29246-X20-X-4-7680 / fa510.fm 173
5.12 Powering off the printing system
Proceed as follows:
1. "Drain printer", i.e. switch the printing system software offline .
2. Click the following button:
The printing system is switched to the "Stop" status.
3. Deactivate the active channel links on the operator panel. To do this, click the
following button:
The <Channels> menu is displayed.
To deactivate the channel, click the following button:
and confirm:
During the time needed for deactivation, the clutch icon is shown in yellow. A
deactivated channel is represented by the following icon:
4. Eject paper from the paper transporter and the fuser station.
If all the paper in the stack was printed on, the paper is automatically ejected.
1 of 2
To Next Page
Loading...
