6.3 Cleaning the paper path
A29246-X20-X-4-7680 / fa602_pinfed.fm 179
6.3 Cleaning the paper path
Cleaning the paper path
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger quantities of toner spill (e. g. full bottle), the
industrial vacuum cleaner must be explosion-proof.
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
2. Open the cover hood.
3. Open the left door at the front of the printing system.
4. Remove paper from the paper path.
To Next Page
Loading...
