7.3.4.7 Replacing the discharge corotron (torn wire)
A29246-X20-X-4-7680 / fa703.fm 287
7.3.4.7 Replacing the discharge corotron (torn wire)
The following procedure is for replacing the discharge corotron:
• Remove torn discharge corotron >>> page 287
• Install new discharge corotron >>> page 288
Remove torn discharge corotron
Important
Observe the safety directives before replacing corotrons (see section 7.3.4 Replacing
corotrons, page 269).
Proceed as follows:
Important
This section does not apply to the error message "HV error discharge corotron". See
Abschnitt 7.3.4.7.
1. Pull out the handle of the corotron
mounting and push away from the PC
drum.
1 of 2
To Next Page
Loading...
