6.10 Cleaning the toner suction system
A29246-X20-X-4-7680 / fa605.fm 213
6.10 Cleaning the toner suction system
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger quantities of toner spill (e. g. full bottle), the
industrial vacuum cleaner must be explosion-proof.
There is a danger of slipping on toner or developer spill.
Clean up toner and developer spill immediately.
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
2. Open the center door at the back of the printing system.
3. Pull the container downwards with the
handle.
1 of 5
To Next Page
Loading...
