7.3.4.3 Replacing the transfer corotron (torn wire) (pinfed)
A29246-X20-X-4-7680 / fa702_pinfed.fm 275
7.3.4.3 Replacing the transfer corotron (torn wire) (pinfed)
The following procedure is for replacing the torn transfer corotron:
• Remove torn transfer corotron >>> page 275
• Install new transfer corotron >>> page 277
Remove torn transfer corotron
Important
Observe the safety directives before replacing corotrons (see section 7.3.4 Replacing
corotrons, page 269).
Proceed as follows:
1. Click the following button to move corotrons to the replacement position:
2. Turn the knob to the left and swivel the
rocker downwards.
3. Swivel up the locking lever and
release.
To Next Page
Loading...
