7.3.4.3 Replacing the transfer corotron (torn wire) (pinfed)
276 A29246-X20-X-4-7680 / fa702_pinfed.fm
4. Swivel down the paper transporter by
the handle to the stop point.
5. When doing so, ensure that the locking
lever is engaged on the conveyor.
6. Lift spring and simultaneously push it
slightly to the right. Pull out corotron
cartridge only a few millimeters so that
the spring is held.
7. Carefully pull out the corotron cartridge.
Proceed as follows:
To Next Page
Loading...
