7.3.11 Replacing the fine filter
330 A29246-X20-X-4-7680 / fa703.fm
7.3.11 Replacing the fine filter
Observe the following safety directives when replacing the fine filter:
The printing system detects the end of the fine filter's service life automatically and displays
a warning on the operator panel. The following procedure is for replacing the fine filter:
- Remove fine filter >>> page 330
- Install fine filter >>> page 332
- Clean toner dust indicator >>> page 334
Remove fine filter
Caution
• Do not allow toner to get into eyes. In the event of contact with eyes, rinse eyes out
with plenty of water and seek medical help.
• Avoid contact between skin and toner. In the event of contact with the skin, wash
toner off with plenty of water.
• Do not inhale toner. Avoid accumulation of dust. If, after inhaling toner, you
experience symptoms such as nausea, headaches or dizziness, immediately go out
into the fresh air.
• If toner falls on the floor, clean it up immediately, otherwise there is a danger of
slipping.
• Keep fine filter out of the reach of children.
Important
Keep used fine filter for collection by service or the contracted shipping company .
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
1 of 3
To Next Page
Loading...
