7.3.11 Replacing the fine filter
A29246-X20-X-4-7680 / fa703.fm 331
2. Select the <Replace consumables> <Replace fine filter> menu on the operator
panel.
3. Click the following button to start fine filter replacement:
Information on the icons displayed on the operator panel under "Worksteps":
see section Icons, page 93
4. Open the left and center door at the back of the printing system.
5. Push lever to the left of the fine filter
container down to unlock the filter
housing.
6. Remove fine filter container with both
hands.
Proceed as follows:
2 of 3
To Next Page
