5.9.2.2 Installing the developer station
154 A29246-X20-X-4-7680 / fa509.fm
5.9.2.2 Installing the developer station
You will find detailed information here on the following topics:
Preparations for installing the developer station >>> page 154
Installing the developer station >>> page 156
Final tasks for installing the developer station >>> page 160
Preparations for installing the developer station
Proceed as follows:
1. Remove the protective hood above the
developer station and put in a safe
place.
2. Check whether the developer station is
at the backmost position on the
replacement cart. The locking bolt on
the replacement cart must be engaged
in the housing of the gear motor.
1 of 2
To Next Page
Loading...
