Oce VarioStream 7000 SINGLE - 5.7 Removing the paper stack

5.7 Removing the paper stack
A29246-X20-X-4-7680 / fa508.fm 131
5.7 Removing the paper stack
The stacker should always be cleared before paper is inserted, even when reinserting
paper due to paper problems.
Removing a partial stack
Proceed as follows:
1. Click on the following button:
2. Press the EJECT until the last printed page has been placed in the stacker.
3.
Raise the stacker top by pressing the left key under this icon .
4. Cut the paper web with the paper
cutter.
5. Remove the paper stack.
1 of 2