5.10 Converting the printing system
162 A29246-X20-X-4-7680 / fa509.fm
5.10 Converting the printing system
The printing system can be converted to a different configuration. The following
configuration options are available:
• High quality - toner: black (600 dpi, 350 pages / minute)
• Normal quality - toner: CustomTone
®
(300 dpi, 350 - 550 pages / minute)
• Normal quality - toner: MICR (300 dpi, 350 - 550 pages / minute)
9. Close the photoconductor drum door.
Important
Print problems possible.
Clean the toner mark sensor before you begin to print.
10. Clean the toner mark sensor (see section 6.8.1 Cleaning the toner mark sensor,
page 207).
11. Close the center door at the back of the printing system.
12. Close the left and right door at the front of the printing system.
13. Click on the following button:
Proceed as follows:
3 of 3
To Next Page
Loading...
