7.2.3 Replacing the waste toner bottle
234 A29246-X20-X-4-7680 / fa701.fm
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
2. On the operator panel select:
• Menu <Replace consumables> <Replace waste toner bottle>
3. Click on the following button to start the waste toner bottle replacement:
Information on the icons displayed on the operator panel under "Worksteps":
see section Icons, page 93
4. Open the left and center door at the back of the printing system.
5. Pull the locking lever of the waste toner
bottle holder forwards. The waste
toner bottle holder will move to its
lower position.
1 of 2
To Next Page
