7.2.3 Replacing the waste toner bottle
A29246-X20-X-4-7680 / fa701.fm 235
6. Remove waste toner bottle holder by
the locking lever.
7. Place interlock lid on the full waste toner bottle.
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber
nozzle and filter set for fine dust. For larger quantities of toner spill (e. g. full bottle),
the industrial vacuum cleaner must be explosion-proof.
8. Remove bottle from holder by the
handle.
If toner has gathered in the holder,
remove with a vacuum cleaner.
Proceed as follows:
2 of 2
To Next Page
