Cleaning materials and equipment
366 A29246-X20-X-4-7680 / faA01.fm
Round brush Cleaning the toner dust
indicator
Standard store-bought quality
e.g. pipe cleaners EGRA-bunt,
OLDENKOTT, etc.
Soft cloth Cleaning surfaces MOLTOPREN or similar
Soft brush To clean areas that are
not easily accessible
1 cm (1/2") round brushes and 2" flat
brushes, standard store-bought quality
with NYLON or hair bristles.
Do not use brushes with metal casings.
Vacuum cleaner To remove paper dust
and residue, toner and
developer residue/spill
Caution
Always use an industrial vacuum
cleaner with a grounded suction tube,
rubber nozzle and filter set for fine
dust. For larger quantities of toner
spill
(e. g. 1 bottle), the industrial vacuum
cleaner must be explosion-proof.
Cleaning foil To clean the paper width
sensor
supplied; available only from Océ Printing
Systems
Cleaning felt with handle To clean the paper edge
sensor
supplied; available only from Océ Printing
Systems
Cleaning felt with angled
handle
To clean the paper width
sensor
supplied; available only from Océ Printing
Systems
Cleaning materials/
equipment
Purpose Remarks
2 of 2
To Next Page
