7.3.5 Replacing the active filter
A29246-X20-X-4-7680 / fa703.fm 295
3. Swivel on active filter unit by the
handle to the stop point.
4. Swivel on oiling unit and turn the oiling
unit turning knob to the right.
5. Close side door of fuser station.
6. Enter on the operator panel whether a new active filter has been fitted:
•
The message on the operator panel is deleted automatically, the replacement of
the active filter is recorded in the <Consumables history> menu and the
consumable counter is reset.
•
The consumable counter is not reset.
Proceed as follows:
2 of 3
To Next Page
