Omron CQM1H - PROGRAM User Manual

86
High-speed Counter Board Section 2-1
Subroutine 001
Sets continuous contact pulse
output from output position 02 at
200 Hz and starts pulse output.
Executes subroutine 001 when
IR 05000 turns ON.
Executes subroutine 003 when
IR 05002 turns ON.
Executes subroutine 002 when
IR 05001 turns ON.
Subroutine 002
Sets continuous contact pulse
output from output position 02 at
100 Hz and starts pulse output.
Subroutine 003
Sets continuous contact pulse
output from output position 02 at
0 Hz and starts pulse output.
@SBS(91)
001
05000
RET(93)
@SBS(91)
002
05001
@SBS(91)
003
05002
SBN(92)
001
25313 (Always ON)
SPED (64)
020
#0020
RET(93)
SBN(92)
002
25313 (Always ON)
SPED (64)
020
001
#0010
RET(93)
SBN(92)
003
25313 (Always ON)
SPED (64)
020
001
#0000
END (01)
001
RET(93)
RET(93)
RET(93)
•
•
•
•
•
•
•
•
•
•
•
•
•

Omron CQM1H - PROGRAM Specifications

General

I/O Capacity	Up to 512 points
Power Supply	100 to 240 VAC, 50/60 Hz or 24 VDC (depending on model)
Instruction Set	Basic and advanced instructions
Operating Temperature	0 to 55°C
Program Capacity	7.2K to 15.2K steps
Communication Ports	RS-232C
Expansion Slots	Up to 3 expansion units
Type	Programmable Logic Controller (PLC)
CPU Type	RISC
Program Memory	7.2K to 15.2K steps
I/O Points	512 max
Expansion Capability	Up to 3 expansion units
Data Memory	RAM (battery backup)