Omron TJ1-MC04 - PROGRAMMING 1 User Manual

Trajexia Tools interface
PROGRAMMING MANUAL 198
Revision 3.0
5.5.2 Controller menu
fig. 25
The Controller menu lets you set the communication between the
PC and the Trajexia system, and control the Trajexia system.
Connect
Connect to the Trajexia system and starts the project manager.
Available if the Trajexia Tools is disconnected from the system.
Disconnect
Disconnects from the Trajexia system. Available when the Trajexia
Tools is connected to the system.
Connect to simulator
Not fully implemented for Trajexia.
Reset the controller
Do a software reset on the Trajexia system. The Trajexia Tools
application disconnects from the Trajexia system.
Recover project from EPROM
Resets the Trajexia system and restores the programs that are on
the EPROM to the PC.
I52E-EN-03.book Seite 198 Freitag, 29. Juni 2007 11:55 11

Omron TJ1-MC04 - PROGRAMMING 1 Specifications

General

Brand	Omron
Model	TJ1-MC04 - PROGRAMMING 1
Category	Controller
Language	English