Trajexia Tools interface
PROGRAMMING MANUAL 205
Revision 3.0
Set power up mode
fig. 30
It is possible to make the programs in the TJ1-MC__ run
automatically when the system starts up. Select Set Powerup
Mode to open the Run On Power Up dialog window.
Select the program you want to run automatically. A small drop
down menu appears to the right of the window. If you want Trajexia
to allocate the process to run in, choose default as the process
number. You can also specifically select the process.
5.5.4 Tools menu
fig. 31
The Trajexia Tools tools can be accessed by the Tools Menu or the
Toolbar button.
I52E-EN-03.book Seite 205 Freitag, 29. Juni 2007 11:55 11
To Next Page
Loading...
Need help?
General
