Trajexia Tools interface
PROGRAMMING MANUAL 221
Revision 3.0
5.5.5 Options menu
fig. 45
In the Options menu the system options for the Trajexia system
are set:
Communications
fig. 46
Allows to set and view the communication settings. The settings
can only be changed offline. The different options are:
• Serial for other OMRON motion controllers (C200HW-MC402-E
and R88-MCW151-E).
• USB is not used.
• Simulation. Used to work offline, a virtual motion control system
is simulated.
• Ethernet is the option used for Trajexia.
• PCI is not used.
Editor
Edits the different options of the text editor.
I52E-EN-03.book Seite 221 Freitag, 29. Juni 2007 11:55 11
To Next Page
Loading...
