Introduction
Thank you for purchasing the V430.
This manual provides information regarding functions, performance and operating methods that
are required for using the V430.
When using the V430, be sure to observe the following:
• The V430 must be operated by personnel knowledgeable in electrical engineering.
• To ensure correct use, please read this manual thoroughly to deepen your understanding of the
product.
• Please keep this manual in a safe place so that it can be referred to whenever necessary.
NOTE
•
•
Microsoft, Windows, Windows Vista, Excel, and Visual Basic are either registered trade-
marks or trademarks of Microsoft Corporation in the United States and other countries.
EtherCAT® is registered trademark and patented technology, licensed by Beckhoff
Automation GmbH, Germany.
ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
•
•
Microsoft product screen shots reprinted with permission from Microsoft Corporation.
Copyrights
• All rights reserved. No part of this publication may be reproduced, stored in
a retrieval system, or transmitted, in any form, or by any means, mechanical,
electronic, photocopying, recording, or otherwise, without the prior written
permission of OMRON.
Trademarks
Other company names and product names in this document are the trademarks
or registered trademarks of their respective companies.
• No patent liability is assumed with respect to the use of the information
contained herein. Moreover, because OMRON is constantly striving to improve
its high-quality products, the information contained in this manual is subject
to change without notice. Every precaution has been taken in the preparation of
this manual. Nevertheless, OMRON assumes no responsibility for errors or omis
sions. Neither is any liability assumed for damages resulting from the use of
the information contained in this publication.
To Next Page
Loading...
Need help?
General
