Auto Focus Multi Code Reader V430-series User’s Manual (Z392) 1-19
Quick Start
Step 3 — Install ESP
ESP Software can be found on Microscan’s Tools Drive that is packaged with the reader
if the Drive was ordered at the time of purchase. ESP can also be installed from the
Download Center, located at: www.microscan.com.
• Follow the prompts to install ESP from the Microscan Tools Drive or Download Center.
• Click the ESP icon on your desktop to run the program.
Minimum System Requirements
• 233 MHz Pentium
®
PC
• Windows
®
8, 7 operating system (32-bit or 64-bit)
• Internet Explorer
®
6.0 or higher
• 128 MB RAM or greater
• 160 MB free disk space
• 800 x 600 256 color display (1024 x 768 32-bit color recommended)
To Next Page
Loading...
