Omron V430-F Series User Manual

Auto Focus Multi Code Reader V430-series User’s Manual (Z392) 7-53
I/O Parameters
Diagnostics Output 2
Note: Output On under Output 2 Parameters must be set to Diagnostic Warning for
this output to function.
Configurable Output 3
Note: Output 3 has the same parameters and default settings as Output 1 and Output 2.
Trend Analysis Output 3
Note: Output On under Output 3 Parameters must be set to Trend Analysis for this output
to function.
ISO/IEC 16022 Symbol Quality Output 3
Note: Output On under Output 3 Parameters must be set to Symbol Quality for this
output to function.
Serial Cmd: <K791,unused 1,service unit>
Serial Cmd:
< K812, output on,output state,pulse width,output mode>
Serial Cmd: < K782, trend analysis mode,trigger evaluation period,number to output on>
Serial Cmd: < K802, output on symbol contrast,symbol contrast threshold,output on print
growth,print growth threshold,output on axial non-uniformity,axial non-uniformity
threshold,output on UEC,UEC threshold>

Omron V430-F Series Specifications

General

Brand	Omron
Model	V430-F Series
Category	Barcode Reader
Language	English