Omron V430-F Series - Symbol Quality Serial Commands

Auto Focus Multi Code Reader V430-series User’s Manual (Z392) 8-3
Symbol Quality
Symbol Quality Serial Commands
Symbol Quality Separator /
Output Mode
<K708,symbol quality separator, output mode>
ISO/IEC 16022 Symbol Quality
Output
<K709,symbol contrast,print growth,axial non-uniformity,
unused ECC>
Microscan Symbol Quality Output
<K710,percent cell damage,total read time,capture
time,locate time,decode time,pixels per element,ECC
level,matrix size,quiet zone,symbol angle>
ISO/IEC 15415 Symbol Quality
Output
<K725, aperture, overall, contrast, modulation, reflectance
margin, fixed pattern damage, axial nonuniformity, grid
nonuniformity, unused ECC>
ISO/IEC 15416 Symbol Quality
Output
<K726, aperture, overall, edge determination, decode,
contrast, minimum reflectance, minimum edge contrast,
modulation, defects, decodability, quiet zone>
ISO/IEC 29158 Symbol Quality
Output
<K727, overall, cell contrast, cell modulation, fixed pattern
damage, axial nonuniformity, grid nonuniformity, unused
ECC>