Auto Focus Multi Code Reader V430-series User’s Manual (Z392) 2-15
Using ESP
Send/Receive Options
To ac c ess Receive, Save, and Default options, click the Send/Recv button. You can also
access these options by right-clicking in any of the configuration views.
Receiving
From the Send/Recv menu, select Receive Reader Settings.
Caution: Do not select this option if you do not want to upload the reader’s settings. For
example, if your ESP file has a number of custom settings that you want to maintain and
download into the reader, these settings would be lost by choosing Yes.
This is useful if you want to receive (upload) the reader’s settings and save them as a file
for future use. For example, if your reader has settings that you do not want to change,
choosing Yes would allow you to load those settings to ESP and save them in an ESP file
for later retrieval.
Receiving the reader’s settings will also assure that you will not be subsequently saving
any unwanted changes that you or someone else has made previously in ESP.
Saving
Send, No Save (<A>)
Saves
ESP
settings to current
memory.
Send and Save (<Z>)
Activates all changes in current memory and saves to the reader for power-on.
Send and Save as Customer Defaults (<Zc>)
Saves your default settings for quick retrieval.
This option will be visible only if you have checked Enable ‘Send and Save as Customer
Defaults’ in ESP Preferences.
To Next Page
Loading...
Need help?
General
