Omron V430-F Series - Video

10-4 Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
Video
Video
The Video view is similar to the EZ Mode interface, in that the user has the ability to perform
the same Locate, Calibrate, and Test routines. There is also a focal distance adjustment
tool to the right of the video view.
Video also features Capture and Decode functionality, which is similar to the Configuration
interfaces (
Communication , Read Cycle , Symbologies , I/O , Matchcode , and Diagnostics ).
Allows the user to take an
image capture of the
symbol in the field of view
at any time, and to
decode the symbol data.
Similar to the Capture
and Decode function in
the Configuration views.
Initiates the Test routine.
Allows the user to test the
reader’s read rate and decodes
per second, and also displays
decoded symbol data in the
field at the bottom of the
screen, Click Stop to end the
Test routine.
Clicking this icon enables the
focal distance slide control to
the right of the video view.
The focal distance value is
displayed just below the icon.
When enabled, shows the
symbol in higher contrast
than the default contrast
value.
Symbol data and
Test results are
shown in this field.
Initiates Calibration routine.
Activates the reader’s target
pattern and initiates live
video display of the symbol
in the field of view.