To Next Page

To Previous Page

Auto Focus Multi Code Reader V430-series User’s Manual (Z392) 1-1

1 Quick Start

Contents

This section is designed to get your V430-series up and running quickly with WebLink or

ESP Software

. Following these steps will allow you to get a sense of the reader’s capabilities

and to test sample symbols.

There are three ways to configure and test the V430-series:

•

Microscan's browser-based WebLink user interface, which enables you to access, config-

ure, and test your reader without having to install software or access files on a host sys-

tem(recommended);

• Microscan's ESP Software, which allows you to configure your reader using simple tree

controls and UI elements;

• Serial commands that can be sent from the Terminal in WebLink or ESP, or from another

terminal program.

Parts of this manual introduce the basic functionality of WebLink, but WebLink Help in the

WebLink user interface provides more detailed information. This manual's primary focus is

the firmware and ESP Software.

V430-series and WebLink Quick Start .......................................................................................... 1-2

Step 1 —Check Hardware and Connect the System....................................................................1-2

Step 2 —Mount and Position the Reader ..................................................................................... 1-4

Step 3 —Connect to WebLink....................................................................................................... 1-4

Step 4 —Explore the Start View ................................................................................................... 1-5

Step 5 —Create a New Setup or Load an Existing Setup ............................................................ 1-6

Step 6 —Explore the Setup View..................................................................................................1-7

Step 7 —Configure Read Cycle Settings......................................................................................1-8

Step 8 —Configure Acquire Settings .......................................................................................... 1-10

Step 9 —Configure Symbology Settings.....................................................................................1-13

Step 10 —Format Output and Configure Match String ...............................................................1-14

Step 11 —Configure Output 1, 2, and 3 Settings........................................................................1-15

Step 12 —Run the Application....................................................................................................1-16

V430-series and ESP Software Quick Start................................................................................ 1-17

Step 1 —Check Hardware and Connect the System..................................................................1-17

Step 2 —Mount and Position the Reader ................................................................................... 1-18

Step 3 —Install ESP ................................................................................................................... 1-19

Step 4 —Select Model ................................................................................................................ 1-20

Step 5 —Connect........................................................................................................................ 1-22

Step 6 —Locate the Symbol in the Field of View........................................................................1-23

Step 7 —Calibrate....................................................................................................................... 1-24

Step 8 —Test Read Rate............................................................................................................ 1-25

Step 9 —Configure the Reader in ESP....................................................................................... 1-26

Step 10 —Save Configuration in ESP ........................................................................................ 1-27

How to Read Model Numbers..................................................................................................... 1-28

Brand	Omron
Model	V430-F Series
Category	Barcode Reader
Language	English

Omron V430-F Series User Manual

Table of Contents

Other manuals for Omron V430-F Series

Questions and Answers:

Omron V430-F Series Specifications

Related product manuals