1-20 Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
Select Model
Step 4 — Select Model
When you start ESP, the following menu will appear:
1. Click the button showing your model of the reader.
2. Click OK or double-click one of the buttons to select your reader.
3. Depending on the model you have selected, you will see the appropriate Would you
like to connect to the [XX] dialog after selecting your reader and clicking OK.
4. Click Yes when asked if you would like to connect.
Note: If you need to select another model later, click the Switch Model button near
the top of the screen or use Model > New Model in the menu toolbar.
To Next Page
Loading...
Need help?
General
