Omron V430-F Series - Read Rate

13-4 Auto Focus Multi Code Reader V430-series User’s Manual (Z392)
Read Rate
Read Rate
Click the Utilities button and then the Read Rate tab to
display the Read Rate view.
To see the number of decodes per second,
click the Decodes/sec radio button and
then the Start button.
To see the percentage of decodes, click
the Percent radio button and then the Start
button.
To end a Read Rate test, click the Stop
button (the Start button becomes a Stop
button during an active Read Rate test.)
Read Rate information is displayed in
the lower portion of the Utilities view.
Serial commands can also be sent to
the reader from this screen.