Orbotech SPTS Xactix e1 Series - Uncrating the System

Manual Version e1-4.3.0.ae-R3. Page
25
Figure 7. Moving the Crated System
4.5 Uncrating the System
WARNING
BECAUSE OF THE WEIGHT OF THE E1 SERIES,
THREE OR
MORE PEOPLE ARE REQU
IRED DURING THE
INSTALLATION TO REMOVE THE UNIT F
ROM THE
SHIPPING CONTAINER AND TO POSITION IT IN
TO ITS
FINAL POSITION FOR OPERATION.
Using a power screwdriver, start opening the crate by removing the side panel labeled “Open This Side
First,” as shown in Figure 6.