Panasonic EBL512 - Disable; Re-enable alarm devices (H2;B9)

Panasonic Eco Solutions Nordic AB
MEW01457 Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
105
25.7 Re-enable non-reset zone / address (H2/B7)
NOTE!
This menu is no longer valid. See chapter "Single encapsulated reset",
page 52.
Menu H2/B5 shall be used instead.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 92.
Scroll to menu H2:
Disable or re-enable
ACCEPT? H2
"A"
Disable zone
ACCEPT? B1
Scroll to menu B7.
Re-enable non-reset zone / address
ACCEPT? B7
"A"
This menu is no longer valid.
Use menu H2/B5. ACCEPT?
"A"
Re-enable non-reset zone / address
ACCEPT? B7
Scroll or press "Return" to
menu H2. Scroll or press
"Return" to log off.