Panasonic EBL512 - 1 Introduction

Panasonic Eco Solutions Nordic AB
MEW01457 Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
7
1 Introduction
EBL512 Operating Instructions is a document
1
intended to be used by
the end-user and the fire brigade personnel as well as service /
commissioning engineers.
Due to continual development and improvement, different S/W
versions are to be found. This document is valid for S/W version
2.7.x. On the date / rev date of the document x = 0.
Since the EBL512 control unit (c.i.e.) is produced for many countries
the look, the texts, the functions, etc. might vary.
Products
Consists of one or more parts (HW) according to a Product Parts
List. A product has:
 a type number (e.g. 1548)
 an article number, often = the type no. and sometimes is a
country code added (e.g. 1548SE)
 a product name (e.g. EBL512 control unit, 128 addresses,
without printer)
HW
A HW (e.g. a printed circuit board) has:
 a type number (e.g. 1556)
 an article number, often = the type no. and sometimes is a
country code added (e.g. 1556SE)
 a product name (e.g. Main Board 128 addr.)
 a p.c.b. number (e.g. 9261-3A) and can also have a configuration
(e.g. CFG: 1) and a revision (e.g. REV: 2)
 sometimes a S/W
S/W
A S/W has:
 a version number (e.g. V2.7.x)
 sometimes additional information, such as Convention (different
functions / facilities), Language, Number of addresses, etc.
PC S/W
A PC S/W is a program used for programming, commissioning, etc. It
has a version number.
1
File name: L:\User documents\512\Doc\2.7.x\MEW01457 (Rev -).doc