Panasonic EBL512 - Disable interlocking output (H9;C4)

Panasonic Eco Solutions Nordic AB
MEW01457 Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
156
32.2 Activate interlocking output (H9/C2)
The output in each interlocking combination (area / point) can be
manually activated via this menu. The corresponding interlocking
input will be "monitored" in the same way as if the output was
activated by its control expression.
Reset has to be performed via menu H9/C3.
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 92.
Scroll to menu H9.
Interlocking outputs and inputs
ACCEPT? H9
"A"
Activated interlocking outputs/inputs
ACCEPT? C1
Scroll to menu C2.
Activate interlocking output
ACCEPT? C2
"A"
Activate interlocking output
area 000 point 00 ACCEPT?
Write the area and point,
e.g.:
Activate interlocking output
area 001 point 01 ACCEPT?
Press "A" to accept and/or
"Return" to menu C2.
"A"
Activate interlocking output
ACCEPT? C2
Scroll or press "Return" to
menu H9. Scroll or press
"Return" to log off.