Panasonic Eco Solutions Nordic AB
MEW01457 Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
162
35 How to change paper in the printer
When the paper roll is almost empty, a red line appears on one edge of
the paper. Change the paper roll before it's completely empty!
Always have a spare paper roll on site.
Change the paper roll as follows:
* Read all instructions before changing the paper roll.
* Open the control unit door. Unlock the (metal) inner door
by removing the screw, placed on top, to the left of the inner
door. Open the inner door.
* Remove the old paper roll carefully, cut the paper so that the
paper within the printer remains there.
* Take the new paper roll, tape the new paper to the old paper
and place the paper roll on the printer.
* Press the "Paper feed" button (P7) until the new paper comes
out of the printer.
Cut off the paper and lock the inner door. Close the control unit door.
To Next Page
Loading...
