Panasonic EBL512 - 9 Disable; Re-Enable Alarm Devices

Panasonic Eco Solutions Nordic AB
MEW01457 Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
30
9 Disable / Re-enable alarm devices
The outputs
30
programmed for sounders (type 3 = alarm devices) can
via menu H2/B9 be collectively disabled for one, more or all control
units. This is indicated by LED "Disablements" (L8) and LED Fault /
Disablements "Alarm devices" (L13) steady ON.
In case of a fire, the sounders will remain disabled, i.e. the alarm
devices will not sound.
They will remain disabled until they are re-enabled again via menu
H2/B9.
See also chapter "Disable / Re-enable alarm devices (H2/B9)", page
107.