Panasonic EBL512 - Calibration of supervised outputs (H5;A1)

Panasonic Eco Solutions Nordic AB
MEW01457 Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
125
28 Service (H5)
When commissioning an installation and by maintenance (power on
and programming a control unit / a system), menu H5 is used to get
certain information and help.
Only authorised personnel have access to level 4 menus. Access code
for level 4 is required.
Via a PC
104
and Win512 (+ access code for level 5) you can:
 download / backup site specific data (SSD)
 download of S/W / settings / configurations / C.U. & system data
 create and download the user definable text messages shown in
the alphanumeric display in the C.U. / ext. FBP and in the Display
units.
Via a PC
105
and TLON Manager you can do the TLON network
programming / configuration.
TLON Manager is used for programming of network data / addresses
/ etc.
104
Connected to the "D" connector J1 on the main board 1556.
105
Connected to the modular connector J2 on the main board 1556.