Panasonic EBL512 - Safe shut down of control unit (H8;S8)

Panasonic Eco Solutions Nordic AB
MEW01457 Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
147
31.7 De-activate alert annunciation function
(H8/S6)
Normal function (1):
For alarm points / zones programmed for Alert Annunciation (via
Win512) is normally this function enabled via a time channel, e.g.
enabled daytime (during working hours) and disabled night time.
As an alternative for alarm points / zones programmed for Alert
Annunciation can this function be continuously enabled.
Off (0)
Via this menu (H8/S6) it is possible to de-activate (disable) the AA
function, i.e. the AA function will be disabled for the alarm points /
zones programmed for Alert Annunciation in spite of the time channel
is "on" or if they are programmed to be continuously enabled.
The AA function will stay de-activated (disabled) until re-activated
(re-enabled) again via this menu.
Action
Text in display
Comments
"Access"
According to chapter
"Access code for
maintenance", see page
141.
Scroll to menu S6.
De-activate alert annunciation function
ACCEPT? S6
"A"
Alert annunciation function? 1
(1 = Normal, 0 = Off) ACCEPT?
Write "0" or "1" and press
"A" to accept.
"A"
De-activate alert annunciation function
ACCEPT? S6
Scroll or press "Return" to
return to menu H8. Scroll
or press "Return" to log
off.