Need help?Do you have a question about the Panasonic EBL512 and is the answer not in the manual?
General| Brand | Panasonic |
|---|---|
| Model | EBL512 |
| Category | Fire Alarms |
| Language | English |
Unit for control and indication, connects alarm points.
Unique installation data created via PC program Win512.
Microprocessor controlled intelligent fire alarm system.
PC software used for programming and commissioning the system.
PC software for programming and commissioning EBL512 units.
Controls for operating the Fire Brigade Panel.
Access via PC (Win512) for advanced service and configuration.
Identifies units on COM loops using NNNNNN number.
Identifies units on BS4 loops using NNNNNN number.
Number to identify alarm points, zones for display and configuration.
Early warning alarm level before a full fire alarm.
Details the system's response to a fire alarm event.
Menu for displaying fire alarms, faults, and disablements.
Procedures for resetting fire alarms from the system.
Resets all active fire alarms simultaneously.
Resets one fire alarm at a time.
Lists and explains various fault messages for system issues.
Procedure for acknowledging and managing system faults.
Steps for commissioning control units within a TLON network.
Procedure for installing and configuring TLON networks.
Verifies units connected to COM loops and compares with SSD.
Process for downloading Site Specific Data to a single unit.
Downloading SSD to multiple control units in a network.
Procedure for downloading new S/W to a single control unit.
Downloading new S/W to multiple control units in a network.
Disables all alarm points within a selected zone.
Disables individual addressable alarm points or zones.
Disables individual control outputs.
Re-enables previously disabled zones.
Re-enables disabled addressable alarm points or zones.
Re-enables previously disabled control outputs.
Calibrates supervised voltage outputs for proper function.
Safely shuts down the control unit to save data.
To Next Page
