Panasonic EBL512 - 29 Acknowledge FAULTS (H6)

Panasonic Eco Solutions Nordic AB
MEW01457 Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
138
29 Acknowledge FAULTS (H6)
Regarding fault indication, etc., see chapter "Fault", page 55.
See also chapter "Fault acknowledge", page 76.
All faults (i.e. not acknowledged faults, acknowledged faults and
corrected / serviced faults) are stored in the event log and can be
listed, see chapter "Event log (H4/U7)", page 123.
In menu H6 are up to 300 faults listed (not acknowledged and
acknowledged but not corrected / not serviced faults).
Action
Text in display
Comments
"Access"
According to chapter
"Access", see page 92.
Scroll to menu H6.
Acknowledge FAULTS
ACCEPT? H6
"A"
FAULT: Xxxxxxxx............
Date: MM-DD Time: HH:MM See comments
NOTE! The date is in some conventions / languages
shown as DD-MM.
This is a list in which
you can scroll. The first
fault in the list is the
most recent fault. If a
fault is corrected, the
text: Serviced
113
is
shown. To acknowledge
the fault shown in the
display, press "Fault
acknowledge".
"Fault acknowledge"
FAULT: Xxxxxxxx............
Date: MM-DD Time: HH:MM Acknowledged
The fault is now
Acknowledged. If /
when the fault is
corrected, it is no longer
shown in this list. Scroll
in the list (e.g. to
acknowledge more
faults) or press "Return"
to menu H6.
114
"Return"
Acknowledge FAULTS
ACCEPT? H6
Scroll or press "Return"
to log off.
113
If faults are selected (via Win512) to be "not latched", the text Serviced
will never be shown.
114
When the list is empty, i.e. when all faults are acknowledged and
corrected / serviced, you will automatically return to menu H6: