Panasonic FP0 - Page 18

Overview FP0
1 − 4
1.1 Components
1.1.2 FP0 Expansion Units
Specifications
Product
name
Number of
I/O points
Power
supply
voltage
Input Output
Connection
type
Part No. Product No.
8 Input: 8 —
24
V
DC
Sink/Sourse
( common)
— MIL connector FP0−E8X AFP03003
8 Input: 4
Output:
4
24 V DC
24 V DC
Sink/Sourse
Relay output: 2 A Terminal block FP0−E8RS AFP03023
FP0 E8
Expansion
p
Output: 4
Sink/Sourse
( common)
y
p
Molex connector FP0−E8RM AFP03013
Expansion
Unit
8 Input: 8 24 V DC
—
Relay output: 2 A Terminal block FP0−E8YRS AFP03020
Unit
8 Output: 8 —
—
Transister otuput:
NPN 0.1 A
MIL connector FP0−E8YT AFP03040
Transister otuput:
PNP 0.1 A
FP0−E8TP AFP03050
16 Input: 16 —
24
V
DC
Sink/Sourse
( common)
— MIL connector FP0−E16X AFP03003
16 Input: 8
Output:
8
24 V DC
24 V DC
Sink/Sourse
Relay output: 2 A Terminal block FP0−E16RS AFP03323
p
Output: 8
Sink/Sourse
( common)
y
p
Molex connector FP0−E16RM AFP03313
FP0 E16
Expansion
Ui
16 Input: 8
Output: 8
—
24 V DC
Sink/Sourse
(
)
Transister otuput:
NPN 0.1 A
MIL connector FP0−E16T AFP03343
Expansion
Unit
Output:
8
Sink/Sourse
( common)
Transister otuput:
PNP 0.1 A
FP0−E16P AFP03353
16 Output: 16 —
—
Transister otuput:
NPN 0.1 A
MIL connector FP0−E16YT AFP03340
Transister otuput:
PNP 0.1 A
FP0−E16YP AFP03350
FP0 E32
Ei
32 Input: 16
Output: 16
—
24 V DC
Sink/Sourse
(
common)
Transister otuput:
NPN 0.1 A
MIL connector FP0−E32T AFP03543
FP0
E32
Expansion
Unit
Output:
16
/
( common)
Transister otuput:
PNP 0.1 A
FP0−E32P AFP03553
Notes
1) The control units and relay output type expansion units come
with a power cable (part number AFP0581).
(The transistor output type expansion units need no power
cable.)
2) The terminal block type relay output units have 2 terminal
blocks (9 pins) made by Phoenix. Use a 2.5 mm .098 inch wide
screwdriver.
Preferably use the specific terminal block screwdriver (part
number AFP0806, Phoenix type code SZS0, 4 2.5 mm .098
inch) or equivalent.
3) The connector−type relay output units have 2 connectors
made by Nihon Molex (Molex type code 51067−0900, 9 pins).
Use the specific Molex connector press−fit tool (part number
AFP0805, Nihon Molex type code 57189−5000) or equivalent.
4) The transistor output units have a press−fit socket for
wire−pressed terminal cable and contacts.
Use the press−fit tool (part number AXY52000) for
wire−pressed terminal cable.