Panasonic FP0 - Options and Additional Parts

Overview FP0
1 − 6
1.1 Components
1.1.6 Options and Additional Parts
Product name Specifications Product No.
FP
Memory
loader
Data clear type AFP8670
FP Memory loader
Data hold type AFP8671
Terminal screwdriver
Relay output type
Necessary when wiring terminals block (Phoenix).
AFP0806
Molex connector
pressure contact tool
Necessary when wiring relay output type and Molex connectors. (MOLEX: 57189−5000) AFP0805
Multi−wire connector
pressure contact tool
Necessary when wiring transistor output type connectors. AXY52000
FP0 Slim 30 type
mounting plate
Screw−stop attachment plate for 30 mm/1.181 inch width the unit. AFP0811 (set for 10)
Slim type FP0 mounting
plate
Screw−stop attachment plate for FP0 expansion unit. Slim model. AFP0803 (set for 10)
Flat type FP0 mounting
plate
Screw−stop attachment plate for FP0 control unit. Flat model. AFP0804 (set for 10)
Rela
y
out
p
ut Molex t
yp
e
Loose−wiring cable (9 leads) AWG20, with Molex socket attached at
d
05
2
1
t
2
bl
(bl
&
hit )
Length: 1 m/3.281 ft. AFP0551 (2 cable set)
Relay
output
Molex
type
I/O cable
Loose wiring
cable
(9
leads)
A
WG20,
with
Molex
socket
attached
at
one end, 0.5 mm
2
, 1 set: 2 cables (blue & white).
Length: 3 m/9.843 ft. AFP0553 (2 cable set)
Transistor out
p
ut t
yp
e
Wire−pressed terminal cable (10 leads) AWG22, 0.3 mm
2
with con-
t
tt h d
t
d
1
t
2
bl
(bl
&
hit )
Length: 1 m/3.281 ft. AFP0521 (2 cable set)
T
ransistor
output
type
I/O cable
Wire pressed
terminal
cable
(10
leads)
A
WG22,
0.3
mm
with
con
nectors attached at one end, 1 set: 2 cables (blue & white).
Length: 3 m/9.843 ft. AFP0523 (2 cable set)
Flat cable connector for
FPS/FP0 transistor type
unit
If you are using flat cable connector, request the part specified below for a connector with an
asymmetrical design to prevent mistaken polarity. (10−pin)
AXM110915
Terminal socket
Attaches to relay output and terminal block type. Additional part AFP0802
(2 sockets per pack)
Molex socket
Attaches to relay output and Molex connector types. Additional part AFP0801
(2 sockets per pack)
Wire−press socket
Attaches to transistor output type. Additional part AFP0807
(2 sockets per pack)
FP0 Power cable
Attaches to FP0 various units. Additional part Length: 1 m/3.281 ft. AFP0581
(1 socket per pack)