InstallationFP0
6 − 5
6.2 Important Notes
6.2 Important Notes
Please, read the following notes carefully before the installation of your FP0.
Notes
Avoid installing the unit in the following locations:
− Ambient temperatures outside the range of 0°Cto55°C/32°F
to 131°F
− Ambient humidity outside the range of 30% to 85% RH
− Sudden temperature changes causing condensation
− Inflammable or corrosive gases
− Excessive airborne dust or metal particles
− Benzine, paint thinner, alcohol or other organic solvents or
strong alkaline solutions such as ammonia or caustic soda
− Excessive vibration or shock
− Direct sunlight
− Water in any form including spray or mist
Avoid noise interference from the following items:
− Influence from power transmission lines, high voltage
equipment, power cables, power equipment, radio
transmitters, or any other equipment that would generate
high switching surges
− If noise occurs in the power supply line even after the
above countermeasures are taken, it is recommended to
supply power through an insolated transformer, noise filter,
or like.
next page
To Next Page
Loading...
Need help?
General
