Optional Memory FP0
2 − 10
2.2 Specifications
2.2.2 Performance Specifications
Item
Relay output type Transistor output type S−LINK
type
C10RS/
C10RM/
C10CRS/
C10CRM
C14RS/
C14RM/
C14CRS/
C14CRM
C16T/
C16P/
C16CT/
C16CP
C32T/
C32P/
C32CT/
C32CP
T32C SL1
Programming method/Control method Relay symbol/Cyclic operation
Controllable I/O
points
Basic unit Total: 10
Input: 6
Output: 4
Total: 14
Input: 8
Output: 6
Total: 16
Input: 8
Output: 8
Total: 32
Input: 16
Output: 16
Total: 32
Input: 16
Output: 16
Max. 128
Input: 64
Output: 64
at S−LINK
block
With expansion
unit 1
When config-
ured with same
output type as
control unit
Max. 58 Max. 62 Max. 112 Max. 128 Max. 128
Max. 96 at
expansion
block
With expansion
unit 2
When relays
and transistors
are mixed
Max. 106 Max. 110 Max. 112 Max. 128 Max. 128
Program memory Built−in memory Built in EEPROM (without battery)
Program capacity 2,720 steps 5,000
steps
10,000
steps
5,000 steps
Numbers of
Basic 83
instruction
High-level 145
Operation speed 0.9µs/step (by basic instruction)
I/O refresh and base time With no expansion board: 0.3ms
With expansion board(s): 0.3ms and (1 x number of expansion boards) ms
Operation
memory
points
Relay
Internal relay (R) 1,008 points (R0 to R62F) 1,008
points (R0
to R62F)
(* Note 1)
1,008
points (R0
to R62F)
Special internal
relay (R)
64 points (R9000 to R903F)
Timer/Counter
(T/C)
144 points (initial setting is 100 timer points, T0 to T99 / 44 counter points,
C100 to C143 (* Note 2))
Timer range: 1ms, 10ms, 100ms, 1s; selected by instruction
Memory
area
Data register
(DT)
1,660 words (DT0 to DT1659) 6,144
words
(DT0 to
DT6143)
16,384
words
(DT0 to
DT16383)
(* Note 1)
6,144
words
(DT0 to
DT6143)
Special data
register (DT)
112 words (DT9000 to DT9111) 112 words
(DT90000
to
DT90111)
112 words
(DT9000
to
DT9111)
Index register
(IX, IY)
2 words
Differential points (DF, DF/) Unlimited of points
Master control relay points (MCR) 32 points
Number of labels (JP and LOOP) 64 labels 255 labels 64 labels
To Next Page
Loading...
